| |
|
|
|
|
|
||||
|
||||
|
Measurement Settings Dialog The Measurement Settings Dialog is used to configure all settings that influence the measurement.
How to open the measurement settings dialog To open the measurement settings dialog click "Measurement" from the "Settings" menu in the menu bar. Harmonics In this section, you can choose the harmonics that are considered during the measurement. The numbers represent the multiplication factor to get the frequency of the harmonic (e.g. 2.0 is the perfect Octave). Measurement Mode With these radio buttons, you can change the mode of the measurement. Standard is a fast measurement mode that is accurate enough to tune most instruments. The Accurate mode has a better resolution than the standard and needs more time to display the results. The "Most Accurate" mode provides a resolution of 0.01 Cent. Note that this mode needs a steady tone for several seconds and can therefore not be used e.g. for a piano. System Gage Some old sound cards are not accurate. You can adjust the error for the input device and for the output device here. The default value is 0.0 Cent. Auto Tone Detection Use this radio buttons to configure whether the Instrument-tuner should change the current selected tone. There are two possible settings:
Auto Measurement Stop If the auto measurement stop is turned off, Instrument-Tuner will display each measurement. If turned on, Instrument-Tuner will only display measurements that contain a tone "near" the reference tone.
Instrument Tuner Instrument Tuner Software Instrument Tuning Instrument Tuning Software Instrument Tuning Tool Instrument Tuning Tools Piano Tuner Piano Tuner Software Piano Tuning Piano Tuning Software Piano Tuning Tool Piano Tuning Tools Self Tuning Piano Tune Instrument Tune Organ Tune Piano Stimmgerät Stimmgeräte Stimmen Instrument Stimmen Musikinstrument Stimmen Stimmgerät für Musikinstrument Stimmsoftware Klavier Stimmen Klavier Stimmgerät Stimmgerät für Klavier Orgel Stimmen Orgel Stimmgerät Stimmgerät für Orgel |
